i use napa (gates)
i get a discount on them
Btw, if you like the goodyear gatorbacks, the part number for them is 4040335. Its a 850mm belt. If you get dayco you are gonna have to go ever so slightly bigger, instead of the typical 850 mm you should get 860 or something like that.
i use napa (gates)
i get a discount on them
hey dc2nr, did yu ever put that belt on your car? I'm trying to get this info before the thread is forgotten forever and this stays mysterious.
Does anyone know if these sizes would fit on a LS with 6psi with the CRV pulley upgrade?
<font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by DC2NR:
(pulled from archives thanks to crom and holden)
All GSR belts are 4 rib.
Stock Belt Sizes
AC = 31" = 790mm
PS = 36.5" = 930mm
Alt. = 33" = 835mm
6psi JRSC Belt Sizes
AC = 31" = 790mm
PS = 36.5" = 930mm
Alt. = 31.5" = 800mm
Blower = 24.5" = 620mm
8psi JRSC with Blower Pulley Belt Sizes
AC = 31" = 790mm
PS = 36.5" = 930mm
Alt. = 31.5" = 800mm
Blower = 23.4"-24" = 595mm-610mm
10psi JRSC with CRV Pulley Belt Sizes
AC = ????
PS = 900mm
Alt. = 850mm
Blower = 24.5" = 620mm
i couldnt find the AC belt size, im intrested in this myself. im installing the CRV crank pulley sometime when the weather permits, its really cold! also what should i set my timing to? what should i gap my spark plugs at?
<font color="#a62a2a"><font size="1">[ January 20, 2005 05:58 AM: Message edited by: DC2NR ]</font></font>
yea i put it on, it works fine for me, buy my supercharger belt squeels =/
yeah but he has yet to state what size belt he used for his crv pulley to ac compressor belt. What is it dc2nr
<font color="#a62a2a" size="1">[ February 14, 2005 02:55 AM: Message edited by: racerx159 ]</font>
33.5 belt
but my sc belt is the wrong size so it squeels in boost, so i cant say forsure if the a/c belt doesnt squeel, but ac does work fine.
taking a/c belt off, so i can isolate the noises.
like jim said, my car is like a school band, there all great band students, they just arnt playing the same song.
<font color="#a62a2a"><font size="1">[ February 14, 2005 06:46 AM: Message edited by: DC2NR ]</font></font>
<font color="#a62a2a"><font size="1">[ February 14, 2005 06:47 AM: Message edited by: DC2NR ]</font></font>
<font color="#a62a2a" size="1">[ February 14, 2005 06:49 AM: Message edited by: DC2NR ]</font>
see? Great to know, not many people know the actual size for that belt. And I just happen to have that belt right now sitting in my trunk. Thanks for all your help guys.
Crank to P/S, A/C and alternator should all be those listed above for the CRV pulley. The alternator to blower belt would remain the same as you have now... unless you add a stepper pulley or reduce the blower pulley diameter.
hey guys for the MVM stepper pulley and 10 psi pulley...will the 850MM work for the alternator?
<font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by DC2NR:
(pulled from archives thanks to crom and holden)
All GSR belts are 4 rib.
Stock Belt Sizes
AC = 31" = 790mm
PS = 36.5" = 930mm
Alt. = 33" = 835mm
6psi JRSC Belt Sizes
AC = 31" = 790mm
PS = 36.5" = 930mm
Alt. = 31.5" = 800mm
Blower = 24.5" = 620mm
8psi JRSC with Blower Pulley Belt Sizes
AC = 31" = 790mm
PS = 36.5" = 930mm
Alt. = 31.5" = 800mm
Blower = 23.4"-24" = 595mm-610mm
10psi JRSC with CRV Pulley Belt Sizes
AC = ????
PS = 900mm
Alt. = 850mm
Blower = 24.5" = 620mm
i couldnt find the AC belt size, im intrested in this myself. im installing the CRV crank pulley sometime when the weather permits, its really cold! also what should i set my timing to? what should i gap my spark plugs at?
<font color="#a62a2a"><font size="1">[ January 20, 2005 05:58 AM: Message edited by: DC2NR ]</font></font>
Posting Permissions
Bookmarks